Booth 11-D08
The MTX CNC system being exhibited by Bosch Rexroth will help manufacturers of CNC laser and plasma cutting machines significantly reduce their development times and time to market.
With features such as the compact and modular drive system ‘ctrlX Drive’ from the firm’s ‘ctrlX Automation’ toolkit, the MTX saves space and enables a high degree of scalability.
The SLM500 can integrate lasers independently or in parallel to increase build rates by 90% over twin laser configurations
Bosch will utilise its new systems to produce parts for its powertrain technology, including custom aluminium parts for hydrogen technology and electric drive productions
The coherent beam combining technology of Civan's Dynamic Beam Laser can be used to produce a wide range of beam profiles.
Matthew Dale learns how Bosch Research plans to use one of the most recent developments in laser technology
Hydrogen fuel cells could provide a suitable alternative to plug-in electric HGVs, where the weight of the battery could prove to be an issue. (Image: Shutterstock/Audeo und werbung)
New laser technology could help make hydrogen-powered vehicles commercially viable, David Stuart finds
Dana's metallic bipolar plates are an integral component in the fuel cell stack
The system enables process stability monitoring in laser structuring to create functionalised surfaces such as easy to clean finishes for home appliances
Daniel Holder, of the IFSW at the University of Stuttgart, shares how new USP laser technologies could facilitate the rapid micromachining of silicon wafers
Bosch supplies automated assembly lines for welding and gluing battery cells. (Image: Bosch)
The firm aims to generate annual sales of €250 million by 2025 with equipment for battery production
The laser system under development within LAMpAS could be used to create grease-repellent ovens that are far easier to clean. (Image: LAMpAS consortium)
Surface treatment via ultrafast lasers could lead to home appliances that remain clean for longer periods of time
Lino Costa, Brian Canfield, and Trevor Moeller describe how ultrafast laser micromachining enables the creation of next-generation thrusters for nanosatellites
Lino Costa, Brian Canfield, and Trevor Moeller describe how ultrafast laser micromachining enables the creation of next-generation thrusters for nanosatellites
Christian Geiger and Tony Weiss highlight the need for advanced laser welding and process monitoring techniques to optimise bipolar plate joining
Christian Geiger and Tony Weiss highlight the need for advanced laser welding and process monitoring techniques to optimise bipolar plate joining
Gwenn Pallier and Yoan Di Maio highlight the challenges of laser surface texturing and propose a strategy for increasing its efficiency
Gwenn Pallier and Yoan Di Maio highlight the challenges of laser surface texturing and propose a strategy for increasing its efficiency
Christian Nowroth, Jan Grajczak, and Sarah Nothdurft investigate the potential of using ultrasonic vibrations to improve the properties of dissimilar metal welds
Christian Nowroth, Jan Grajczak, and Sarah Nothdurft investigate the potential of using ultrasonic vibrations to improve the properties of dissimilar metal welds
Peter Kazansky and Yuhao Lei describe how direct laser writing of glass can enable 5D optical data storage and high-efficiency beam shaping
Peter Kazansky and Yuhao Lei describe how direct laser writing of glass can enable 5D optical data storage and high-efficiency beam shaping
Leonardo Caprio, Claudio Orlandi and Ali Gӧkhan Demir assess the applicability of handheld laser welding for the flexible production of components with aesthetic requirements
Leonardo Caprio, Claudio Orlandi and Ali Gӧkhan Demir assess the applicability of handheld laser welding for the flexible production of components with aesthetic requirements
With 802 exhibitors and 29,581 visitors in attendance at Formnext this year, the AM industry has clearly returned to its pre-Covid levels of enthusiasm for live networking. (Image: Mesago)
Matthew Dale on some of the key innovations seen at Formnext this year
Numerous 30kW systems were at EuroBLECH 2022 and generating plenty of interest, as seen here at Cutlite Penta’s booth.
Matthew Dale reports on the increase in 30kW+ flatbed cutting systems seen at EuroBLECH, Hannover this year
Velo3D has customers using multiple AM systems under one roof to facilitate serial production. (Image: Velo3D)
In a recent webinar, experts shared how additive technologies are already being deployed in specialist sub-sectors for volume manufacturing
Stent manufacturing is one of the biggest applications of laser technology in medical device manufacturing.
(Image: Shutterstock/Christoph Burgstedt)
Sharon Ann Holgate identifies the key advantages and developing applications of femtosecond lasers in the medical industry
Marcel Bachman, of BAM, describes the behaviour and influence of weld pool shape when joining thick materials
Marcel Bachman, of BAM, describes the behaviour and influence of weld pool shape when joining thick materials
Micromarking on a gold dubloon for anti-counterfeiting purposes, made using QiOVA’s structured light beam (Credit: QiOVA)
Anita Chandran explores the latest challenges facing manufacturers and users of laser marking systems
An experimental setup for laser peen forming. Water is used to confine the miniature explosions generated at the material surface, increasing the overall process efficiency (Credit: Helmholtz Zentrum hereon GmbH)
Researchers are investigating the potential of laser peening for the manipulation of titanium alloy sheets in the aerospace sector
