The AP 530 S can be configured with a femtosecond laser for texturing, a picosecond laser for permanent black marking, or a nanosecond laser for general marking or engraving
Coherent’s AP 530 S is a freeform texturing and marking system for implantable medical devices
While the system is capable of cutting up to 50mm-thick sheet metal, it will likely be used to cut medium thicknesses at higher speed and quality to achieve lower cost per part
The cutting head of the LS7 automatically adapts to the thickness and type of material (stainless steel, aluminum, mild steel, copper, and others) to ensure clean, precise and consistent cuts
The LaserSmart 810XL can achieve a surface finish as low as Ra 40nm while producing crisper cutting edges and 30% faster feed rates compared to conventional laser machines
The new system provides the agility to handle a diverse range of cutting applications across a wide range of material types and thicknesses
The new laser is available in either 7 or 14W power variations
The low heat laser applies perfect marks on materials with extraordinary absorption properties
The latest multi-laser, large-format metal platforms are targeted for high-speed production of high quality large-scale additive manufacturing
The system is ideal for micromachining metals, polymers, ceramics, and glasses.
This femtosecond laser system is ideal for precision micromachining of metals, polymers, ceramics, and glasses
The system enables 3D cutting and shaping of hard and brittle materials such as industrial diamond or ceramic as well as sophisticated composites used in aerospace and automotive applications
The new system from LPKF enables a four-layer PCB to be produced in just one day.
This new system from LPKF enables a four-layer PCB to be produced in just one day
Lino Costa, Brian Canfield, and Trevor Moeller describe how ultrafast laser micromachining enables the creation of next-generation thrusters for nanosatellites
Lino Costa, Brian Canfield, and Trevor Moeller describe how ultrafast laser micromachining enables the creation of next-generation thrusters for nanosatellites
Christian Geiger and Tony Weiss highlight the need for advanced laser welding and process monitoring techniques to optimise bipolar plate joining
Christian Geiger and Tony Weiss highlight the need for advanced laser welding and process monitoring techniques to optimise bipolar plate joining
Gwenn Pallier and Yoan Di Maio highlight the challenges of laser surface texturing and propose a strategy for increasing its efficiency
Gwenn Pallier and Yoan Di Maio highlight the challenges of laser surface texturing and propose a strategy for increasing its efficiency
Christian Nowroth, Jan Grajczak, and Sarah Nothdurft investigate the potential of using ultrasonic vibrations to improve the properties of dissimilar metal welds
Christian Nowroth, Jan Grajczak, and Sarah Nothdurft investigate the potential of using ultrasonic vibrations to improve the properties of dissimilar metal welds
Peter Kazansky and Yuhao Lei describe how direct laser writing of glass can enable 5D optical data storage and high-efficiency beam shaping
Peter Kazansky and Yuhao Lei describe how direct laser writing of glass can enable 5D optical data storage and high-efficiency beam shaping
Leonardo Caprio, Claudio Orlandi and Ali Gӧkhan Demir assess the applicability of handheld laser welding for the flexible production of components with aesthetic requirements
Leonardo Caprio, Claudio Orlandi and Ali Gӧkhan Demir assess the applicability of handheld laser welding for the flexible production of components with aesthetic requirements
With 802 exhibitors and 29,581 visitors in attendance at Formnext this year, the AM industry has clearly returned to its pre-Covid levels of enthusiasm for live networking. (Image: Mesago)
Matthew Dale on some of the key innovations seen at Formnext this year
Numerous 30kW systems were at EuroBLECH 2022 and generating plenty of interest, as seen here at Cutlite Penta’s booth.
Matthew Dale reports on the increase in 30kW+ flatbed cutting systems seen at EuroBLECH, Hannover this year
Velo3D has customers using multiple AM systems under one roof to facilitate serial production. (Image: Velo3D)
In a recent webinar, experts shared how additive technologies are already being deployed in specialist sub-sectors for volume manufacturing
Stent manufacturing is one of the biggest applications of laser technology in medical device manufacturing.
(Image: Shutterstock/Christoph Burgstedt)
Sharon Ann Holgate identifies the key advantages and developing applications of femtosecond lasers in the medical industry
Marcel Bachman, of BAM, describes the behaviour and influence of weld pool shape when joining thick materials
Marcel Bachman, of BAM, describes the behaviour and influence of weld pool shape when joining thick materials
Micromarking on a gold dubloon for anti-counterfeiting purposes, made using QiOVA’s structured light beam (Credit: QiOVA)
Anita Chandran explores the latest challenges facing manufacturers and users of laser marking systems
An experimental setup for laser peen forming. Water is used to confine the miniature explosions generated at the material surface, increasing the overall process efficiency (Credit: Helmholtz Zentrum hereon GmbH)
Researchers are investigating the potential of laser peening for the manipulation of titanium alloy sheets in the aerospace sector
