LaserEMobility was founded in 2020 by the Politecnico di Milano, the Università di Bologna, and the Technical University of Munich along with the industrial members IMA Automation Atop, Manz, and Raylase.
The event was held in Bologna in March, taking up the challenge of responding to the increasing industrial pull for laser-based manufacturing systems in the production of electric vehicles
The coherent beam combining technology of Civan's Dynamic Beam Laser can be used to produce a wide range of beam profiles.
Matthew Dale learns how Bosch Research plans to use one of the most recent developments in laser technology
This paper will explain the importance of batteries, their thermal management systems, and how new technologies such as Dynamic Beam Lasers can change the way batteries and their cooling plates are produced
Plasmo is an Austrian-based provider of automated quality assurance and diagnostic solutions. (Image: Plasmo Industrietechnik)
nLight has acquired Plasmo Industrietechnik to add machine vision and analysis products to its manufacturing solutions
HV Wooding has experienced a £600,000 increase in turnover since the UK emerged from lockdown. (Image: H V Wooding)
The new Trumpf TruLaser 3030 will immediately be put to work in producing thin gauge laminations and busbars for use in electric vehicles
The Rayspector monitoring makes it easier to offer the market profitable, user-friendly solutions for smart manufacturing/Industry 4.0 that serve to promote development of the electromobility sector across the globe
Christian Geiger and Tony Weiss evaluate laser technology readiness for the mass-production of electric vehicles
What are the best OEM and supplier solutions for building EV battery systems, and how are these battery systems best integrated into the car body structure?
The mobility and technology sectors will meet for the first IAA in Munich from September 7 to 12, 2021.
IAA 2021 will become an exhibition, a forward-looking mobility platform and a dialogue forum all at the same time.
The new IAA is a triad:
Bosch supplies automated assembly lines for welding and gluing battery cells. (Image: Bosch)
The firm aims to generate annual sales of €250 million by 2025 with equipment for battery production
Dr Jason Lee, of Luxinar, reviews competing CO2 laser technologies in terms of processing capability, relative lifetime and cost
Joshua Evans, of Bofa International, shares how proper fume management helps maintain the durability and build quality of metal 3D printers
Joshua Evans, of Bofa International, shares how proper fume management helps maintain the durability and build quality of metal 3D printers
Dr Christian Otten, of LaVa-X, demonstrates an alternative to emerging blue and green laser technologies for welding copper in electric vehicle production
Dr Christian Otten, of LaVa-X, demonstrates an alternative to emerging blue and green laser technologies for welding copper in electric vehicle production
Here a laser beam is being delivered via a flexible fibre to weld thin piping. (Image: Shutterstock/sspopov)
A brief introduction to laser welding, the technologies involved, and the advantages it offers over other joining methods
Takaaki Yamanashi, of Amada, shares how users have been getting to grips with the firm’s Locus Beam Control technology since it first debuted at EuroBLECH 2018
Takaaki Yamanashi, of Amada, shares how users have been getting to grips with the firm’s Locus Beam Control technology since it first debuted at EuroBLECH 2018
The coherent beam combining technology of Civan's Dynamic Beam Laser can be used to produce a wide range of beam profiles.
Matthew Dale learns how Bosch Research plans to use one of the most recent developments in laser technology
Matthew Dale learnt of smart manufacturing innovations taking place in Japan at the 15th International Laser Marketplace
Matthew Dale learnt of smart manufacturing innovations taking place in Japan at the 15th International Laser Marketplace
Dr Thomas Schopphoven, of Fraunhofer ILT, provides an update on the development of EHLA for 3D printing applications
Dr Thomas Schopphoven, of Fraunhofer ILT, provides an update on the development of EHLA for 3D printing applications
Pravin Sievi, of Scansonic, introduces processing optics that facilitate reproducible and highly reliable hairpin welding in the production of electric motors
Pravin Sievi, of Scansonic, introduces processing optics that facilitate reproducible and highly reliable hairpin welding in the production of electric motors
Jim Bovatsek, applications engineering manager for MKS Spectra-Physics, shares how UV picosecond lasers can effectively cut layered stacks of organic polymers in flexible OLED display production
Jim Bovatsek of MKS Spectra-Physics, shares how UV picosecond lasers can effectively cut layered stacks of organic polymers in flexible OLED display production
